Mold-Tek Technologies Limited
All news and filings related to Mold-Tek Technologies Limited.
View all news & filings- Low impact
Mold-Tek Technologies: Trading Window Closed Oct 1 for Q2 FY27 Results
Mold-Tek Technologies Limited will close its trading window from October 1, 2026. This closure is to facilitate the declaration of unaudited standalone and consolidated financial results for the quarter and half-year ended September 30, 2026. The exact date of the board meeting for results declaration will be announced later.
Read the summary - Medium impact
Mold-Tek Technologies Fixes Oct 9 as Record Date for 1:1 Bonus Share Issue
Mold-Tek Technologies Limited has set October 09, 2026, as the Record Date for its 1:1 bonus share issue. This decision was approved by the Board on September 28, 2026. The bonus shares will be issued by capitalizing reserves. The deemed allotment date is October 12, 2026.
Read the summary - Medium impact
Mold-Tek Technologies Sets Oct 9 as Record Date for 1:1 Bonus Share Issue
Mold-Tek Technologies has fixed October 09, 2026, as the Record Date for its 1:1 bonus share issue. The Board approved the issuance of one bonus equity share of ₹2 for every one fully paid-up equity share of ₹2 held. The deemed date of allotment is October 12, 2026.
Read the summary - Low impact
Mold-Tek Technologies Announces Resignation of Company Secretary and Compliance Officer
Mr. Prateek Kumar Tiwari has resigned as Company Secretary and Compliance Officer of Mold-Tek Technologies Limited, effective September 23, 2026. The resignation is due to personal commitments and new career pursuits. Mr. Tiwari will also cease to be a Key Managerial Personnel.
Read the summary - Low impact
Mold-Tek Technologies Appoints New Company Secretary and Compliance Officer
Mr. Prateek Kumar Tiwari resigned as Company Secretary and Compliance Officer of Mold-Tek Technologies Limited, effective September 23, 2026. The resignation is due to personal commitments and to pursue new career opportunities. He will also cease to be a Key Managerial Personnel.
Read the summary - Medium impact
Mold-Tek Technologies Ltd.: AGM Resolutions Passed, Including Dividend and Bonus Shares
Mold-Tek Technologies Limited's 42nd AGM on Sept 21, 2026, saw all resolutions passed. Shareholders approved the FY26 financial statements, a final dividend of ₹2 per share, and the issue of bonus shares. Director re-appointments and remuneration approvals were also confirmed.
Read the summary - Low impact
Mold-Tek Technologies Re-appoints Mrs. Madhuri Viswanadham as Independent Director
Mold-Tek Technologies Limited has re-appointed Mrs. Madhuri Venkata Ramani Viswanadham as a Non-Executive Independent Director for a second five-year term. The re-appointment is effective from December 27, 2026, to December 26, 2031, and was approved at the 42nd AGM held on September 21, 2026.
Read the summary - High impact
Mold-Tek Technologies Ltd Holds 42nd AGM, Approves Final Dividend and Bonus Shares
Mold-Tek Technologies Limited's 42nd AGM on September 21, 2026, approved the FY26 Audited Financial Statements, a final dividend of ₹2 per share, and the issue of bonus shares. The meeting also saw the re-appointment of directors and approval of CMD remuneration. Remote e-voting occurred from September 17-20, 2026.
Read the summary - Low impact
Mold-Tek Technologies announces 42nd AGM on Sep 21, 2026, with e-voting facility
Mold-Tek Technologies Limited will hold its 42nd AGM on September 21, 2026, via VC/OAVM. Remote e-voting is available from September 17-20, 2026. The cut-off date for voting eligibility is September 14, 2026.
Read the summary - Medium impact
Mold-Tek Technologies Announces 42nd AGM, Bonus Issue, and Director Reappointments
Mold-Tek Technologies will hold its 42nd AGM on September 21, 2026. The company plans a 1:1 bonus share issue, capitalizing ₹5.76 crore. Re-appointments of directors and approval of CMD remuneration are on the agenda. A final dividend of ₹2 per share is proposed.
Read the summary - High impact
Mold-Tek Technologies Announces 42nd AGM on Sep 21, 2026, Approves 1:1 Bonus Share
Mold-Tek Technologies will hold its 42nd AGM on September 21, 2026, to approve FY26 financial results and a ₹2 per share dividend. The company plans a 1:1 bonus share issue, capitalizing ₹5.76 crore from reserves. Remuneration for the CMD and re-appointment of an independent director are also on the agenda.
Read the summary - Low impact
Mold-Tek Technologies Announces 42nd AGM on September 21, 2026, Recommends Final Dividend
Mold-Tek Technologies Limited will hold its 42nd AGM on September 21, 2026, at 2:30 PM IST via VC/OAVM. The board recommended a final dividend of ₹2 per equity share for FY2026. The record date for the dividend is September 14, 2026.
Read the summary - High impact
Mold-Tek Announces 1:1 Bonus Issue, ₹2 Final Dividend, and AGM on Sep 21
Mold-Tek Technologies approved a 1:1 bonus share issue and recommended a ₹2 final dividend per equity share. The 42nd AGM is scheduled for September 21, 2026, with a record date of September 14, 2026, for dividend entitlement. Book closure is from September 15-21, 2026.
Read the summary - High impact
Mold-Tek Declares 1:1 Bonus, Recommends ₹2 Dividend, Sets AGM for Sep 21
Mold-Tek Technologies announced a 1:1 bonus share issue, totaling ₹5.76 crore. The company also recommended a final dividend of ₹2 per share for FY26. The 42nd AGM is scheduled for September 21, 2026, with a record date of September 14, 2026, for dividend entitlement. The bonus issue is expected within two months.
Read the summary - High impact
Mold-Tek Announces 1:1 Bonus Issue, ₹2 Final Dividend, and AGM on Sept 21
Mold-Tek Technologies approved a 1:1 bonus share issue and recommended a ₹2.00 per equity share final dividend for FY26. The 42nd AGM is scheduled for September 21, 2026. The bonus issue, valued at approximately ₹5.76 crore, will be completed within two months.
Read the summary - Medium impact
Mold-Tek Technologies Approves 1:1 Bonus Share Issue, AGM on Sep 21, 2026
Mold-Tek Technologies approved a 1:1 bonus equity share issuance. The proposal is subject to shareholder approval at the AGM on September 21, 2026. The company's paid-up capital will increase to ₹11,52,20,472 from ₹5,76,10,236. Reserves & Surplus were ₹115.00 crore as of March 31, 2026.
Read the summary - High impact
Mold-Tek Technologies Recommends ₹2 Dividend, Announces 1:1 Bonus Share Issue
Mold-Tek Technologies recommended a final dividend of ₹2 per share and approved a 1:1 bonus share issue. The 42nd AGM is scheduled for September 21, 2026. The record date for dividend entitlement is September 14, 2026. The bonus issue, valued at ₹5.76 crore, will be implemented within two months.
Read the summary - High impact
Mold-Tek Announces 1:1 Bonus Issue and ₹2 Final Dividend
Mold-Tek Technologies approved a 1:1 bonus share issuance and recommended a final dividend of ₹2 per equity share. The company will hold its 42nd AGM on September 21, 2026. The bonus issue involves approximately 2.88 crore shares valued at ₹5.76 crore.
Read the summary - High impact
Mold-Tek Technologies Q1 FY27 Earnings Call Transcript Released
Mold-Tek Technologies released its Q1 FY27 earnings call transcript. The company reported a significant jump in profitability due to increased revenues and operational efficiencies. Beryl acquisition integration is ongoing, with positive contributions expected from Q3. New contracts in US power distribution and expansion into Georgia are key growth drivers. Management projects EBITDA margins of 20-23% and a FY28 revenue target of ₹300-350 crore.
Read the summary - Low impact
Mold-Tek Technologies Publishes Q1 FY27 Un-audited Financial Results
Mold-Tek Technologies Limited published its un-audited standalone and consolidated financial results for the first quarter ended June 30, 2026. The results were published in "Financial Express" and "Nava Telangana" on August 07, 2026, and are also available on the company's website.
Read the summary - Low impact
Mold-Tek Technologies: Audio Recording of Q1FY27 Investor Conference Call Uploaded
Mold-Tek Technologies Limited has uploaded the audio recording of its investor conference call held on August 6, 2026. The call focused on discussing the company's Q1FY27 results. The recording is available on the company's website.
Read the summary - High impact
Mold-Tek Technologies Q1 FY27 Profit Surges 1300% to ₹9 Cr on Record Revenue
Mold-Tek Technologies reported record Q1 FY27 results with consolidated revenue up 74.67% to ₹59.54 Cr and PAT surging 1215% to ₹9 Cr. Standalone PAT rose 1602% to ₹10.03 Cr. The company highlighted strong execution, U.S. expansion via Beryl, and a robust order pipeline. Future growth drivers include U.S. municipal contracts and strategic acquisitions.
Read the summary - Low impact
Mold-Tek Technologies Schedules Q1FY27 Earnings Conference Call for August 6, 2026
Mold-Tek Technologies Limited will host an investor conference call on August 6, 2026, at 4:00 PM IST to discuss its Q1FY27 results. Lakshmana Rao Janumahanti, CMD, will be present to discuss the financial performance.
Read the summary - Low impact
Mold-Tek Technologies Ltd. Receives SEBI Compliance Certificate for Q1 FY27
Mold-Tek Technologies Limited has received a compliance certificate from its Registrar and Transfer Agent, XL Softech Systems Limited. The certificate confirms adherence to Regulation 74(5) of SEBI (Depositories and Participants) Regulations, 2018 for the quarter ended June 30, 2026.
Read the summary - Low impact
Mold-Tek Technologies Closes Trading Window from July 1 for Q1 FY27 Results
Mold-Tek Technologies Limited will close its trading window from July 1, 2026, until 48 hours after the declaration of Q1 FY27 unaudited financial results. The board meeting date for approving these results will be announced later.
Read the summary - Medium impact
Mold-Tek Technologies Q4 FY26: Profit Turns Around to ₹2.3 Cr, Revenue Jumps 81%
Mold-Tek Technologies reported a Q4 FY26 profit of ₹2.3 Cr, a turnaround from a ₹1.62 Cr loss last year, despite a ₹4 Cr MTM loss. Full-year PAT was ₹10 Cr. Key growth drivers include Beryl's contribution and increased civil work on hand. The company reduced its loss-making BIW auto MES team and is seeing growth in US poles and towers.
Read the summary - Medium impact
Mold-Tek Technologies Q4FY26 Results: Income at ₹7,194 Crore, Net Profit ₹1,497 Crore
Mold-Tek Technologies reported Q4FY26 standalone net profit of ₹1,497.41 crore, up from ₹1,367.96 crore YoY. Full-year FY26 net profit was ₹5,595.15 crore, up from ₹5,429.02 crore. Consolidated Q4FY26 net profit was ₹1,492.63 crore, and full-year net profit was ₹5,604.24 crore. Total income from operations for Q4FY26 was ₹7,194.52 crore standalone and ₹7,212.01 crore consolidated.
Read the summary - Low impact
Mold-Tek Technologies Uploads Q4 FY26 Earnings Call Audio Recording
Mold-Tek Technologies Limited has released the audio recording of its investor conference call held on May 14, 2026. The call focused on discussing the company's Q4 FY26 financial results. The recording is accessible on the company's official website.
Read the summary - Medium impact
Mold-Tek Technologies Reports Audited FY26 Financial Results
Mold-Tek Technologies announced audited standalone and consolidated financial results for the year ended March 31, 2026. The company reported a standalone profit before tax of ₹1,354.76 lakhs and a consolidated profit before tax of ₹1,304.73 lakhs. The auditors issued an unmodified opinion on the financial statements.
Read the summary - Medium impact
Mold-Tek Technologies Reports Audited Standalone & Consolidated Financial Results for FY26
Mold-Tek Technologies announced audited standalone and consolidated financial results for the quarter and year ended March 31, 2026. Standalone profit after tax for FY26 was ₹1,058.35 lakhs, and consolidated profit after tax was ₹1,009.18 lakhs. Auditors issued an unmodified opinion on the financial statements.
Read the summary - Medium impact
Mold-Tek Technologies Q4 FY26 Results: Audited Standalone & Consolidated Financials Approved
Mold-Tek Technologies Board approved audited standalone and consolidated financial results for the quarter and year ended March 31, 2026. The auditors issued an unmodified opinion on the financial statements. The meeting was held on May 14, 2026.
Read the summary - Low impact
Mold-Tek Technologies to Host Conference Call for Q4FY26 Results on May 14
Mold-Tek Technologies Limited will hold a conference call on May 14, 2026, at 4:30 PM IST to discuss its Q4FY26 results. The call will be addressed by the Chairman and Managing Director, Lakshmana Rao Janumahanti.
Read the summary - Low impact
Mold-Tek Technologies Withdraws Preferential Issue of 2.9 Lakh Shares
Mold-Tek Technologies Limited has withdrawn its proposed preferential issue of up to 2.9 lakh equity shares. The issue, approved on February 28, 2026, was cancelled because the allottee did not transfer the application money by the deadline. A Board circular resolution on May 1, 2026, confirmed the withdrawal.
Read the summary - Low impact
Mold-Tek Technologies Withdraws Interim Dividend Record Date
Mold-Tek Technologies Limited has withdrawn the Record Date of April 24, 2026, for declaring an interim dividend for FY 2025-26. The Board of Directors decided to defer the dividend declaration in a meeting held on April 20, 2026.
Read the summary - Low impact
Mold-Tek defers interim dividend, to consider final dividend for FY26
Mold-Tek Technologies' Board met on April 20, 2026, to discuss audit plans with statutory auditors. The company decided to defer the interim dividend for FY25-26 and will consider declaring a final dividend later. Updates will be provided in due course.
Read the summary - Low impact
Mold-Tek Technologies Defers Interim Dividend for FY26
Mold-Tek Technologies deferred its interim dividend for FY26, aligning with previous year's practice. The company may consider a final dividend for FY26, with updates to follow. The decision was made during a board meeting on April 20, 2026.
Read the summary - Medium impact
Mold-Tek Technologies Board Meeting on Apr 20 to Consider Interim Dividend
Mold-Tek Technologies will hold a Board Meeting on April 20, 2026, to consider the First Interim Dividend for FY 2025-26. The Record Date for this dividend is fixed as April 24, 2026. The trading window remains closed until 48 hours after the declaration of Q4FY26 results.
Read the summary - Medium impact
Mold-Tek Technologies Limited to Utilize ₹4.75 Crore Preferential Issue Proceeds for Nashik Office Construction
Mold-Tek Technologies Limited will use ₹4.75 crore from its preferential issue for constructing a new branch office in Nashik. The project is expected to take 15-18 months from allotment. The company confirmed the funds will be solely used for this capital expenditure.
Read the summary - Low impact
Mold-Tek Technologies Files SEBI Compliance Certificate for Q4 FY26
Mold-Tek Technologies Limited has received a compliance certificate from its Registrar and Transfer Agent for the quarter ended March 31, 2026, under SEBI (Depositories and Participants) Regulations, 2018. This is a routine regulatory filing.
Read the summary - Medium impact
Mold-Tek Technologies Passes Preferential Issue Resolution at EGM
Mold-Tek Technologies Limited's EGM approved the issue of equity shares on a preferential basis. The resolution passed with overwhelming support, as 99 members voted in favor out of 100 participating members. The EGM was held on March 30, 2026.
Read the summary - Medium impact
Mold-Tek Technologies Limited Holds EGM on March 30, 2026, for Preferential Issue
Mold-Tek Technologies Limited held an EGM on March 30, 2026, to approve a Special Resolution for the Issue of Equity Shares on a Preferential Basis. The meeting was attended by 56 members and key management. Remote e-voting was conducted from March 26 to March 29, 2026.
Read the summary - Low impact
Mold-Tek Technologies Announces Trading Window Closure from April 1, 2026
Mold-Tek Technologies Limited will close its trading window from April 1, 2026. The closure will last until 48 hours after the announcement of audited standalone and consolidated financial results for Q4 and the fiscal year ending March 31, 2026. The board meeting date for results declaration will be announced separately.
Read the summary - Low impact
Mold-Tek Technologies Limited Publishes Newspaper Advertisement Regarding Special Window for Physical Securities
Mold-Tek Technologies Limited has published a newspaper advertisement on March 18, 2026, regarding a special window for the transfer and dematerialization of physical securities. This initiative aims to encourage shareholders to dematerialize their holdings, offering benefits like enhanced liquidity and security. The company is facilitating this process through its registrar and transfer agent.
Read the summary - Low impact
Mold-Tek Technologies Receives ₹30.40 Lakh Tax Demand Notice
Mold-Tek Technologies Limited received a tax demand notice of ₹30.40 Lakh from the Income Tax Department for Assessment Year 2024-25. The notice was received on March 18, 2026. The company stated there are no violations and no financial impact on its operations.
Read the summary - Low impact
Mold-Tek Technologies Announces EGM on March 30, 2026, for E-Voting
Mold-Tek Technologies Limited will hold an Extraordinary General Meeting (EGM) on March 30, 2026, via Video Conferencing. Remote e-voting is available from March 26 to March 29, 2026. The cut-off date for voting eligibility is March 23, 2026.
Read the summary - Low impact
Mold-Tek Technologies Announces EGM on March 30, 2026
Mold-Tek Technologies Limited will hold an Extraordinary General Meeting (EGM) on March 30, 2026, at 11:30 AM IST. The meeting will be conducted via Video Conferencing and other Audio Visual Means. Shareholders will be updated on email registration, mobile number updates, and e-voting procedures.
Read the summary - Medium impact
Mold-Tek Technologies to raise ₹4.75 Crore via Preferential Allotment
Mold-Tek Technologies will issue up to 2,90,000 equity shares at ₹164 each, raising ₹4.75 Crore via preferential allotment to Mr. Richard Leon Cannyn. An EGM is scheduled for March 30, 2026, to approve the issuance.
Read the summary - Medium impact
Mold-Tek Technologies Approves Preferential Issue of ₹4.75 Crore Equity Shares
Mold-Tek Technologies will issue up to 2.90 lakh equity shares at ₹164 each, raising ₹4.75 crore via preferential allotment. An EGM is scheduled for March 30, 2026, to approve the issuance to one identified non-promoter investor.
Read the summary - Medium impact
Mold-Tek Technologies Approves Preferential Issue of 2.9 Lakh Shares Worth ₹4.75 Crore
Mold-Tek Technologies will issue up to 2.9 lakh equity shares at ₹164 each, raising ₹4.75 crore via preferential allotment to a non-promoter investor. An EGM is scheduled for March 30, 2026, to approve the issuance.
Read the summary - Medium impact
Mold-Tek Technologies Approves Preferential Issue of Equity Shares Worth ₹4.75 Crore
Mold-Tek Technologies approved a preferential issue of up to 2,90,000 equity shares at ₹164 each, aggregating ₹4.75 crore. An EGM is scheduled for March 30, 2026, to seek member approval. The issue is to identified investor Mr. Richard Leon Cannyn.
Read the summary
Model portfolios
Filings are the raw material. These are what SEBI-registered experts build from them.
- Stocks
Udaan
Fast-growing, less-covered companies still early in their runway.
Aggressive29 holdings5+ yearsView portfolio - Stocks
Bharat Rising
Built around India's own shifts: capex, household savings, energy and consumption.
Moderate-Aggressive25 holdings3+ yearsView portfolio - Stocks
All-Terrain
One equity portfolio instead of three: large, mid and small cap in a single book.
Moderate-Aggressive34 holdings3+ yearsView portfolio - Stocks
Core Compounders
Companies that have already been through a downturn and came out still growing.
Moderate20 holdings3+ yearsView portfolio